Italian - ItalyEnglish (United Kingdom)French (Fr)Deutsch (DE-CH-AT)
email skype
UCIMU

COMEV



 
OUR LATHES

 

100% MADE IN ITALY
QUALITY
SECURITY
RELIABILITY


CONVENTIONAL


AUTO-MEMORY
AND CNC


FOR GOLDSMITH

PICODUE - models 260/300/360/400

 

depliant              technical data          

   gallery

 

The PICODUE CNC lathes are medium sized heavy duty lathes with swings over bed from 520 to 800 mm and bed lengths 1,000 to 4,000 mm. Ideal for turning shafts as well as billets. These lathes as standard are fully guarded with work area lighting and comply with all international safety standards. The standard equipment includes; steady rests, the very comprehensive and easy to programme and operate CNC control system and equipped to be used in “Manual Mode”. A wide range of options are available to suit customers’ needs.


HEADSTOCK

It consists on a heavily ribbed cast iron casting housing the main spindle assemble. The spindle is mounted on precision angular contact bearings, grease lubricated for life. As an option the spindle is available in full “C” axis mode. The spindle can be specified with either 110 or 130 mm through bore; the spindle nose type is camlock, 8 inch or 11 inch respectively.


BED

The G30 cast iron bed is very rigid with large ports for excellent swarf clearance. The bed is fully weathered to relieve casting stresses before machining. The bed ways including the under shears are hardened and precision ground.



PLINTHS

The is bed is supported on heavily ribbed G25 cast iron plinths providing a stiff and well damped bed/plinth structure.



THE CARRIAGE

The carriage is a well-proportioned G30 cast iron casting and runs on vee and flat ways. The contact surfaces with bed are coated with anti-friction material and are hand scraped to the bed. The cross-slide dovetails are hardened and ground. The cross-slide is equipped with tapered gibs for eliminating clearance. The toolholder support is mounted on the cross-slide in Tee slots to enable the tooling arrangement to be fixed in the optimal position. Precision preloaded recirculating ballscrews to ISO 5 are used on both X and Z axes. Handwheels are provided on the carriage for enabling the axes to be electronically moved by hand in increments of 0.001 / 0.010 and 0.100. The X and Z axis ways and ballsrcews are lubricated by an automatic lubrication system.


TAILSTOCK


The heavy duty tailstock is fitted with a hardened and ground quill 100 mm diameter and has a No. 5 Morse Taper. A facility is available to position the tailstock along the bed by using the carriage.



ACCESSORIES

A wide range of accessories are available including; manual and hydraulic chucks, manual tool holder systems, 4 way automatic vertical toolholders, 8 station automatic disc turrets with and without driven tools, “C” axis, chip conveyors, hydraulic steadies, etc.

 

Realizzazione siti web by InformaticaConti