Italian - ItalyEnglish (United Kingdom)French (Fr)Deutsch (DE-CH-AT)
email skype








TITANO CNC - models 50/55/60/65/70


depliant               technical data          



Another very heavy duty lathe series from Comev with massive floor mounted bed providing continuous support enabling bed lengths to give capacity up to 10 metres between centres and swings over bed of 1,000 to 1,400 mm. To provide stiffness when turning the very large diameters these machines have a third supporting way. These lathes are fully guarded, have work area lighting and fully comply with all international safety standards. There is great potential for customisation from a very wide range of available options. Special requirements are also catered for using Comev’s highly competent design engineers and in-house manufacturing facilities.
The flexibility of these machines is complimented by the very comprehensive and easy to programme and operate CNC control system and is equipped to be used in “Manual Mode”.


It consists of a heavily ribbed G25 cast iron casting housing the main spindle assembly and gearing that provide three speed ranges to give the necessary torque for large components that these machines will accommodate. The spindle is mounted on precision bearings. As an option the spindle can have full “C” axis capability. The lathe is available with spindle bores 160, 230, 310 or 405 mm and spindle nose ASA 11”, 15”, 20” and 28” respectively.



The bed is floor mounted bed providing continuous support over it whole length. The bed is fully weathered to relieve casting stresses before machining. The bed ways including the under shears are induction hardened and precision ground. This bed has a third guide way that supports the X axis particularly when turning large diameters. It also provides a long X axis stroke enabling the facing of large components to be executed in a single cut.


The carriage is a well-proportioned G30 cast iron casting and runs on vee and flat ways. The contact surfaces with bed are coated with anti-friction material and are hand scraped to the bed. The cross-slide dovetails are hardened and ground. The cross-slide is equipped with tapered gibs for eliminating clearance. Precision preloaded recirculating ballscrews to ISO 5 are used on both X and Z axes. Handwheels are provided on the carriage for enabling the axes to be electronically moved by hand in increments of 0.001 / 0.010 and 0.100. The X and Z axis ways and ballsrcews are lubricated by an automatic lubrication system.



The heavy duty tailstock is fitted with a hardened and ground 140 mm quill diameter. The quill has a No. 6 Morse Taper.
A facility is available to position the tailstock along the bed by using the carriage or rack and pinion device


A wide range of accessories are available including; manual and hydraulic chucks, manual tool holder systems, 4 way automatic vertical toolholders, 8 and 12 station automatic disc turrets with and without driven tools, “C” axis, grinding units, tailstock with 300 mm dia. quill, hydraulic tailstock quill / clamping / powered movement, hydraulic steadies, chip conveyors, etc.


Realizzazione siti web by InformaticaConti